Fully Flush Modular Walk-On Solid Panel Ceiling System
Our metal faced solid panel walk on ceiling system offers flush interlocking panel to panel edge detail to achieve a flush surface with a silicone seal or PVC cold weld joint infill to achieve an impervious face finish along the entire inside face of the ceiling. The ceiling system is connected to existing building primary structure using treaded bar drop rods. Standard ceiling panel dimensions 1200mm wide x 3000mm long (longer lengths also available depending on ceiling loading requirements). Flush integration of Cleanroom Walk-On Light Fittings (Top & Bottom Access), HEPA & Non HEPA terminal housing air diffusers offers a completely smooth flush cleaning surface free from crevasses & ledges.
Ceiling Panel Thickness start from 50mm for a 0.9kN/m² to 1.5kN/m² Walk-On loading capacity (depending on panel span) & increase to 65/70/75mm thk for 2kN/2.5kN/3kN/m² Walk-On loading capacity (depending on panel span). Various outer finishes available including PET coated metal, uPVC coated metal, Stainless steel, HPL (Phenolic Laminate) & standard polyester powder coat. Various Panel non-combustible cores available including Rockwool & Aluminium Honeycomb. Semi-Flush Fire rated version available up to 120 minutes (depending on design limitations).
Fully Flush Modular Walk-On Grid Bi-Panel Ceiling System
Our metal faced panel tile grid Walk-On ceiling system with clear void in tiles, main runners & noggins to allow electrical cables, small pipes & other services to be contained within the ceiling void with a flush interlocking tile to grid detail to achieve a flush surface with a silicone seal along the entire internal face of the ceiling. Individual tiles & grid can be accessed from the top to allow access to void or services & individual tiles can also be removed if required. The ceiling system is connected to existing building primary structure using treaded bar drop rods. Standard ceiling grid dimensions 1200mm wide x 1200mm long (longer & wider lengths also available depending on ceiling loading requirements). Flush integration of Cleanroom Walk-On Light Fittings in grid profiles freeing up space for other services within the tiles & flush integration of HEPA & Non HEPA terminal housing air diffusers, sprinkler heads & other electrical services offers a completely smooth flush cleaning surface free from crevasses & ledges.
Ceiling Panel Thickness standard 125mm thk which achieves 1.5kN/m² + 2.5kN/m² + 3kN/m² Walk-On loading capacity (depending on grid span). Various outer finishes available including uPVC coated metal, Stainless steel, & standard polyester powdercoat. Tile Sections can be infilled with Rockwool if required.
Lay in Gasketed Metal Ceilings
Our heavy-duty metal faced non Walk-On gasketed metal tile grid ceiling system offers a very cost-effective solution where there is no space to walk above the ceiling and easy access is required from below. The aluminium grid and metal tile system provides a smooth, impervious finish with ceiling tiles which are clipped and gasketed in place. Allows full access to services in ceiling void through access panels which can be accommodated as frequently as is required.
For Cleanroom Envelopes
Asgard can assist with NBS type specification that complies with all North American, European and UK specifications. Please complete the specification selection form and we will email by return your required specification.